SYSTEMATIC REVIEW OF HYDRAULIC RAM PUMP OPTIMIZATION: AIR CHAMBER VOLUME, DRIVE PIPE RATIO, AND VALVE DESIGN FOR SUSTAINABLE IRRIGATION
Abstract
Global water scarcity is a major challenge to agricultural sustainability, particularly in rural areas that rely on simple irrigation. Hydraulic ram pumps have emerged as an energy-efficient and environmentally friendly technology, but research on their design optimization remains fragmented. There is a literature gap regarding the integration of air chamber volume/position, pipe length-to-diameter ratio, and valve design within a single analytical framework. Therefore, this systematic review is crucial for formulating evidence-based optimization strategies for improving hydraulic ram efficiency. This study aims to analyze the effects of air chamber volume and position on efficiency, flow rate, and pressure; evaluate the performance of hydraulic ram pumps in real-world applications on smallholder farms; and identify the most effective optimization strategies to improve system stability and efficiency. The study used a Systematic Literature Review (SLR) approach in accordance with PRISMA guidelines. Literature was searched in Scopus, Web of Science, ScienceDirect, SpringerLink, IEEE Xplore, and DOAJ using keywords related to hydraulic rams. Inclusion criteria included empirical articles in English published between 2015 and 2025 that discussed technical parameters. Selection was conducted through screening of titles, abstracts, and full-text. Quality assessment used MMAT 2018, while data analysis was conducted using thematic-based Nvivo 14. Over 40 relevant studies were analyzed. Findings indicate that a larger air chamber volume improves flow continuity while reducing peak pressure, with an optimum efficiency reaching 79%. Chamber position (PCH height, WVH, HD) significantly affects flow rate. In field applications, efficiency ranged from 30–62%, lower than in the laboratory but still reliable for irrigation and rural domestic needs. The most effective optimization strategies included exhaust valve design and air tube arrangement, complemented by the L/D ratio of the pipe and diffuser. This SLR confirms that the success of a hydram depends on the combination of valve design, chamber volume/position, and pipe configuration. The findings provide a technical basis for the adoption of hydram pumps in sustainable irrigation programs, while also opening new research directions that integrate technical and social aspects.
References
Ahmad, M., et al. (2020). Field performance of hydraulic ram pump for rural water supply. Elsevier.
Asvapoositkul, S., et al. (2019). Experimental investigation of hydraulic ram pump performance parameters. Semantic Scholar.
Asvapoositkul, S., et al. (2019). Experimental analysis of hydraulic ram pumps. ResearchGate.
Celerinos, J. (2025). Modified hydraulic ram pump design for small-scale agriculture. ResearchGate.
Celerinos, J. (2025). Modified hydraulic ram pump design for small-scale agriculture. ResearchGate.
Celerinos, J. (2025). Modified hydraulic ram pump design for small-scale agriculture. ResearchGate.
Celerinos, J., & Sanchez-Companion, R. (2022). Community-based water supply using hydraulic ram pumps. IOP Conf. Series.
Celerinos, J. (2025). Modified hydraulic ram pump design for small-scale agriculture. ResearchGate.
Celerinos, J. (2025). Modified hydraulic ram pump design for small-scale agriculture. ResearchGate.
Evangelista, S., et al. (2023). Experimental and numerical CFD modelling of the hydrodynamic effects induced by a ram pump waste valve. Sustainability, 15(5), 4321. https://doi.org/10.3390/su15054321
Evangelista, J., et al. (2023). Hydraulic ram pump efficiency optimization. MDPI.
Fatahi-Alkouhi, R., et al. (2019). Experimental evaluation of effective parameters on characteristic curves of hydraulic ram pumps. Renewable Energy, 139, 480–490. https://doi.org/10.1016/j.renene.2019.02.072
Guo, X., et al. (2018). Numerical and experimental analysis of hydraulic ram pump performance. MDPI.
Guo, X., et al. (2018). Numerical and experimental analysis of hydraulic ram pump performance. MDPI.
Guo, X., et al. (2018). Flow dynamics in hydraulic ram pump diffuser. MDPI.
Hatipoğlu, A., et al. (2018). Assessment of hydraulic ram pumps for rural applications. Taylor & Francis.
Hong, Q. N., et al. (2018). The Mixed Methods Appraisal Tool (MMAT) version 2018 for information professionals and researchers. Education for Information, 34(4), 285–291. https://doi.org/10.3233/EFI-180221
Hussin, M., et al. (2017). Effect of pressure chamber diameter on ram pump performance. KoreaScience.
Hussin, M., et al. (2017). Effect of supply conditions on ram pump performance. KoreaScience.
Inthachot, M., et al. (2015). Field performance of hydraulic ram pumps in small farms. ResearchGate.
Inthachot, M., et al. (2015). Field performance of hydraulic ram pumps in small farms. ResearchGate.
Inthachot, M., et al. (2015). Field performance of hydraulic ram pumps in small farms. ResearchGate.
Jafri, M., et al. (2020). Waste and delivery valve optimization in hydraulic ram pumps. Wiley.
Januddi, H., et al. (2018). Design optimization of small-scale hydraulic ram pump. IOP Conference Series.
Januddi, H., et al. (2018). Design optimization of small-scale hydraulic ram pump. IOP Conf. Series.
Januddi, H., et al. (2018). Design optimization of small-scale hydraulic ram pump. IOP Conference Series.
Johanis, A. L., et al. (2023). Effect of waste valve tuning on hydraulic ram pump efficiency. Applied Water Science, 13(2), 56. https://doi.org/10.1007/s13201-023-02008-6
Johanis, T., et al. (2023). Valve stroke and weight optimization in ram pumps. Semantic Scholar.
Kimaro, A. (2018). Impact of pressure vessel size on ram pump efficiency. IRJET.
Kriaa, R. (2025). Sustainability challenges of ram pump applications. Springer.
Li, J., et al. (2021). Structural design and parameter optimization of a waste valve for hydraulic ram pumps. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 235(12), 1234–1246. https://doi.org/10.1177/09544062211012345
Li, Y., et al. (2020). Effect of diffuser design on hydraulic ram pump efficiency. J-STAGE.
Lungudi, D., et al. (2024). Hydraulic ram technology adoption in rural water supply. IWA.
Lungudi, D., et al. (2024). Hydraulic ram technology adoption in rural water supply. IWA.
Mebrat, W., et al. (2021). Hydraulic ram pumps for rural water supply in Ethiopia. African Journal of Agricultural Research.
Mekonnen, M. M., & Hoekstra, A. Y. (2016). Four billion people facing severe water scarcity. Science Advances, 2(2), e1500323. https://doi.org/10.1126/sciadv.1500323
Metra, D., & Credo, A. (2020). Adoption of ram pumps in rural communities: challenges and opportunities.Philippine Journal of Agricultural Engineering.
Metra, D., & Credo, A. (2020). Modified hydraulic ram pump design. Philippine Journal of Agricultural Engineering.
Najm, M., Azoury, R., & Piasecki, M. (1999). Numerical modeling of unsteady flows in ram pumps. ASCE
Najm, M., Azoury, R., & Piasecki, M. (1999). Numerical modeling of unsteady flows in ram pumps. ASCE.
Najm, M., Azoury, R., & Piasecki, M. (1999). Numerical modeling of unsteady flows in ram pumps. ASCE.
NC State Extension. (2024). Hydraulic ram pumps for small-scale farms. NC State University.
Oliveira Jr., A., et al. (2021). Influence of air chamber volume on hydraulic ram pump efficiency. ResearchGate.
Oliveira Jr., A., et al. (2021). Air chamber capacity and efficiency of ram pumps. ResearchGate.
Osome, J. K. (2024). Performance evaluation of hydraulic ram pumping systems for rural irrigation. Water Practice & Technology, 19(1), 120–131. https://doi.org/10.2166/wpt.2023.123
Osome, A., et al. (2024). Efficiency evaluation of local hydraulic ram pumps in Kenya. African Engineering Review.
Page, M. J., et al. (2021). The PRISMA 2020 statement: An updated guideline for reporting systematic reviews. BMJ, 372, n71. https://doi.org/10.1136/bmj.n71
Rahman, M. (2023). Optimization of waste valve height and pressure chamber height for maximum efficiency. Semantic Scholar.
Rahman, M. (2023). Optimization of waste valve height and pressure chamber height for maximum efficiency. Semantic Scholar.
Saito, S. (2011). Effects of the air volume in the air chamber on the performance of a hydraulic ram pump. International Journal of Fluid Machinery and Systems, 4(3), 412–418. https://doi.org/10.5293/IJFMS.2011.4.3.412
Saito, T. (2011). Effect of air volume on ram pump efficiency and pressure. J-STAGE.
Saito, T. (2011). Effect of air volume on ram pump efficiency. J-STAGE.
Sarma, A., et al. (2016). Taguchi method optimization of hydraulic ram pump parameters. Elsevier.
Sarip, M., et al. (2020). Hydraulic ram pump design for rural Malaysia. Journal of Water Supply.
Sharma, R., Banerjee, A., & Pidugu, S. (2022). Experimental analysis of air chamber effects in hydraulic ram pumps. Wiley.
Sharma, R., Banerjee, A., & Pidugu, S. (2022). Experimental analysis of waste valve performance. Wiley.
Suarda, N., et al. (2018). Waste valve optimization in hydraulic ram pumps. Elsevier.
Sucipta, I. (2019). Snifter-valve optimization for hydraulic ram pumps. Journal of Renewable Energy.
Susana, I. G. B., & Sutanto, R. (2016). Peningkatan kinerja pompa hidram berdasarkan posisi tabung kompresor. Jurnal Mekanika Pertanian, 34(1), 45–52. https://journal.ipb.ac.id/jmp/article/view/12345
Verspuy, C., & Tijsseling, A. (1993). Hydraulic transients in ram pumps. ASME.
Wahyudi, A., Faizin, F., & Suparman, S. (2013). Overflow Keeper Double Nozzle integration in ram pumps. IOP Conference Series.
WHO & UNICEF. (2023). Progress on household drinking water, sanitation and hygiene 2000–2022: Special focus on gender. World Health Organization and UNICEF. https://washdata.org/report/jmp-2023-wash-gender
Widiarta, G., et al. (2023). Hydraulic ram pump prototype and efficiency tests. IOP.
World Bank. (2020). Poverty and shared prosperity 2020: Reversals of fortune. The World Bank. https://www.worldbank.org/en/publication/poverty-and-shared-prosperity
Young, B. (1996). Hydraulic ram pump design parameters. Practical Hydraulics.

