ANALISIS SIFAT MATERIAL SB 171 C70600 DAN SB 111 C71500 DALAM MENGURANGI DAMPAK KOROSI PADA TUBE HEAT EXCHANGER DI KILANG PENGOLAHAN MINYAK

  • M Deki Zatniko Universitas Jambi
  • Aldo Ramadan Rambe Universitas Jambi
  • Friska Rifki Yumaisya Universitas Jambi
  • Fitriani Pakpahan Universitas Jambi
  • Aldillah Herlambang Universitas Jambi
  • Oki Alfernando Universitas Jambi
  • Rizka Shafira Universitas Jambi
Keywords: Material , Tube, corrosion, Heat exchanger

Abstract

This study aims to analyze the properties of SB 171 C70600 and SB 111 C71500 materials in an effort to minimize the risk of corrosion in the E-3-05 A&C line tube bundle components in an oil refinery. Initially, ASTM A213 Grade T11 (Cr-Mo alloy steel) was used, but it proved unsuitable for corrosive environments, so SB 171 C70600 was chosen as a replacement. The method used included a literature study of the ASME BPVC 2023 specification. The results showed that SB 171 C70600, which contains copper and nickel, has high corrosion resistance, especially in seawater environments, as well as good thermal conductivity. Compared with ASTM A213, this material is superior in terms of corrosion resistance. The selection of this material has been proven to be able to maintain heat transfer efficiency, reduce the risk of leakage, and extend the service life of the components. Therefore, the use of this material is highly recommended for heat exchanger applications that work in corrosive environmental conditions.

References

Fatriansyah, J.F., Nurullia, Z.N., Federico, A. & Priadi, D., 2023. Development of dynamic risk- based inspection using forward difference approach for pipe failure due to uniform corrosion. Journal of Materials Exploration and Findings, 2(1), Article 5. https://doi.org/10.7454/jmef.v2i1.1002
Gao, X. & Liu, M., 2022. Corrosion behavior of high-strength C71500 copper–nickel alloy in simulated seawater with high concentration of sulfide. Materials, 15(23), pp. 8513. https://doi.org/10.3390/ma15238513
Liu, Y., Wang, J., Liu, T., Wei, Z., Luo, B., Chi, M., Zhang, S., Cai, C., Gao, C., Zhao, T., Wang,
S. & Nie, S., 2025. Triboelectric tactile sensor for pressure and temperature sensing in high- temperature applications. Nature Communications, 16, Article 383. https://doi.org/10.1038/s41467-024-55771-0
Malau, M.D., Priambadi, I.G.N. & Didin, 2025. Analisis sifat material SB 171 C70600 dalam meminimalisir risiko korosi pada tube bundle E-3-05 A&C pada kilang minyak. Jurnal Riset dan Aplikasi Teknik Industri, 3(1), pp. 103–109.
Sunandrio, H. & Sutarjo, 2014. Serangan korosi sumuran (pitting corrosion) pada tube heat exchanger di kilang pengolahan minyak. M.P.I., 8(3), pp. 93–100.
Pratama, M.H.R., Akrom, M., Santosa, A.P., Rosyid, M.R. & Mawaddah, L., 2025. Klasifikasi otomatis korosi menggunakan convolutional neural network dan transfer learning dengan model MobileNetV2. Jurnal Algoritma, 22(1), pp. 138–148. https://doi.org/10.33364/algoritma/v.22- 1.2182
Putra, A.A.D., Setiawati, N.L.P.L.S. & Utami, N.M.C., 2025. Identifikasi aktivitas pemborosan pada proses perakitan tube bundle heat exchanger E-201-22AB menggunakan pendekatan process activity mapping (PAM). Jurnal Riset Multidisiplin Edukasi, 2(7), pp. 1005–1022.
Published
2026-05-08
How to Cite
M Deki Zatniko, Aldo Ramadan Rambe, Friska Rifki Yumaisya, Fitriani Pakpahan, Aldillah Herlambang, Oki Alfernando, & Rizka Shafira. (2026). ANALISIS SIFAT MATERIAL SB 171 C70600 DAN SB 111 C71500 DALAM MENGURANGI DAMPAK KOROSI PADA TUBE HEAT EXCHANGER DI KILANG PENGOLAHAN MINYAK. EDU RESEARCH, 7(1), 2449-2455. https://doi.org/10.47827/jer.v7i1.2355
Section
Articles