RE-EVALUASI DAN ANALISIS KRITIS PEMILIHAN MATERIAL PIPA DI INDUSTRI KIMIA
Abstract
Piping systems are critical components in the chemical, oil and gas, and energy industries. Inappropriate pipe material selection has been shown to be a major cause of operational failures, resulting in significant technical, economic, and environmental impacts. This review critically examines five scientific journals addressing pipe material issues in various industrial settings, including the failure of ASTM A179 boiler pipes due to thermal degradation, internal corrosion of API 5L Grade B crude oil pipelines, a comprehensive review of industrial piping systems, the depletion of diesel fuel pipelines in coastal environments, and the effect of sugar contaminants on corrosion rates. The analysis was conducted based on four primary material selection criteria: technical, economic, environmental, and safety. The study results indicate that carbon steel continues to dominate pipe material use in Indonesian industry due to its low initial cost and ease of fabrication. However, this material fundamentally has limited corrosion resistance in aggressive operating environments. Documented failures occur much earlier than the planned design life, indicating that a material selection approach based on initial cost without life cycle cost analysis has proven inefficient. This review proposes alternative materials that are more suitable for each operating condition, including Stainless Steel 316L, Duplex Stainless Steel 2205, and Alloy Steel Cr-Mo, as well as a hybrid approach using advanced coatings (3LPE) combined with a risk-based inspection program as a realistic compromise solution for existing infrastructure.
References
Faidah, A. H., & Takwanto, A. (2026). Analisis Pengaruh Sugar Content dalam Injeksi Out terhadap Laju Korosi pada Perpipaan Sistem Cooling Tower di Industri Gula Indonesia. Distilat: Jurnal Teknologi Separasi, 12(1), 141–150. https://doi.org/10.33795/distilat.v12i1.7923
Maulana, M. F. (2023). Analisa Kegagalan Pipa ASTM A179 pada Ruang Bakar Boiler. Jurnal Multidisiplin Indonesia, 2(9), 2553–2569.
Pratama, A. Z., Pattikayhattu, E. B., & Effendy, E. (2024). Analisis Perubahan Ketebalan Pipa Akibat Pengaruh Korosi dan Sisa Umur Pakai Pipa di PLTD Namlea Kabupaten Buru. Journal Mechanical Engineering (JME), 2(1), 48–63.
Putra, A. R., Syafrullah, M. D., Yuliansyah, Tolusha, M. R., & Mahendra, N. Y. (2025). Investigation of factors causing cracks in primary air tube boilers (case study). Austenit, 17(1), 23–29. https://doi.org/10.53893/austenit.v17i1.10318
Santoso, T., Adrian, R., Fazaul M, R., & Cahyono, R. B. (2025). Analisis Risiko Penyebab Kegagalan Pipa Penyalur Crude Oil. Teknik: Jurnal Teknik Mesin, Elektro dan Ilmu Komputer, 5(1), 09–19. https://doi.org/10.55606/teknik.v5i1.5732
Setyani, A., Hermawan, M. A. J. S., Prabowo, I., & Amin, N. (2025). Investigasi korosi pipa flowline carbon steel pada sistem produksi migas dan penerapan solusi protektif. J- ENSISTEC (Journal of Engineering and Sustainable Technology), 11(2), 10207–10215. https://doi.org/10.31949/j-ensitec.v11i02.13508
Velasco, D. C. R., Goncalves, V. P. D., Oliveira, M. P., Simonassi, N. T., Lopes, F. P. D., & Vieira, C. M. F. (2025). Industrial Piping System: Design and Corrosion Protection. Surfaces, 8(1), 18. https://doi.org/10.3390/surfaces8010018

