KAJIAN TEKNIS PENGGUNAAN CARBON STEEL DAN STAILESS STEEL PADA TANGKI PENYIMPANAN DI INDUSTRI KIMIA: TINJAUAN KETAHANAN KOROSI DAN KELAYAKAN MATERIAL
Abstract
Material selection is a crucial aspect in the design of storage tanks in the chemical industry, particularly in addressing corrosion issues that can reduce equipment performance and service life. This study aims to conduct a technical review of the use of carbon steel and stainless steel by examining their corrosion resistance and material feasibility under various environmental conditions. The method used is a literature study with a comparative analysis approach based on several recent scientific journals. The parameters evaluated include corrosion rate, mechanical strength, environmental conditions, as well as economic and safety aspects. The results of the study indicate that carbon steel has advantages in terms of cost and ease of fabrication; however, it has relatively low corrosion resistance, with a higher corrosion rate compared to stainless steel. On the other hand, stainless steel exhibits better corrosion resistance due to the presence of a passive layer formed by chromium content, making it more stable in aggressive environments. In addition, environmental factors such as chloride content, temperature, and microbial activity also influence the corrosion rate of materials. Under certain conditions, carbon steel may also experience a reduction in mechanical properties due to microstructural changes. Therefore, material feasibility highly depends on operating conditions and the type of fluid being stored. This study concludes that stainless steel is more suitable for storage tanks in corrosive environments, while carbon steel can still be used under less severe conditions with additional protection. Proper material selection will enhance system reliability and reduce the risk of failure in the chemical industry.
References
Leal Matilla, A., Ferrández, D., Prieto Barrio, M. I., & Varum, H. (2025). Systematic review on the behaviour of carbon and stainless steel reinforcing bars in buildings under high temperatures. Buildings, 15(9), 1539. https://doi.org/10.3390/buildings15091539
Nugraha, G. R., Abdillah, H., & Irawan, B. (2024). Analisis penggunaan stainless steel 304 pada mesin heating tank di PT Pachira Distrinusa. Innovative: Journal of Social Science Research, 4(6), 7823–7830.
Parawangsa, G. Y., & Sumarjo, J. (2025). Analysis of mechanical properties of SS 400 steel material with FCAW welding method. Journal of Mechanical and Manufacturing (JMM), 4(2), 51–59. https://doi.org/10.31949/jmm.v4i2.13838
Paterlini, L., Brenna, A., Ceriani, F., Gamba, M., Ormellese, M., & Bolzoni, F. (2024). Atmospheric corrosion of different steel types in urban and marine exposure. Materials, 17(24), 6211. https://doi.org/10.3390/ma17246211
Shamsuddin, R. A., Abu Bakar, M. H., Wan Daud, W. R., Hong, K. B., Jahim, J. M., Wan Mohd Noor, W. S. A., Yunus, R. M., Satar, I., & Ndayisenga, F. (2026). Evaluating the performance of stainless steel in microbial electrolysis cells: Hydrogen production and corrosion behaviour. International Journal of Renewable Energy Development, 15(2), 242–253. https://doi.org/10.61435/ijred.2026.61531

