SYSTEMATIC LITERATURE REVIEW: PENGEMBANGAN HEAT EXCHANGER UNTUK PENGERING (DRYER) DENGAN MENGGUNAKAN PEMANFAATAN LIMBAH PANAS MESIN DIESEL YANMAR TS190H BERBASIS ECO-SMART
Abstract
This study aims to synthesize the engineering parameters, thermal performance, and control architectures of heat exchangers (HE) for agricultural drying systems utilizing waste heat from stationary diesel engines, specifically the Yanmar TS190H class, within an eco-smart paradigm. Using the Systematic Literature Review (SLR) method strictly governed by the PRISMA protocol, this study screened peer-reviewed empirical articles published within the last five years (2021–2026) indexed in Scopus and SINTA databases. The selected literature was subjected to rigorous quality assessment and hybrid thematic analysis. Key findings indicate that finned-tube, heat pipe, and helically coiled heat exchangers represent optimal configurations, achieving heat recovery effectiveness between 60% and 85% while minimizing excessive backpressure and particulate fouling risks. Furthermore, the integration of eco-smart IoT architectures (sensing layers, adaptive PID/Fuzzy logic dampers, and variable speed blowers) effectively stabilizes drying chamber temperatures, suppresses exergy destruction, and guarantees post-harvest product quality. This review formulates an integrated eco-smart thermal recovery framework that bridges thermo-fluid mechanics with smart automation for sustainable agro-industrial applications.
References
Al-Nimr, M. A., & Al-Ammari, W. A. (2023). Smart control of heat exchanger networks powered by low-grade thermal waste for sustainable post-harvest drying. Sustainable Energy Technologies and Assessments, 57, 103233. https://doi.org/10.1016/j.seta.2023.103233
Aziz, M., & Darmawan, A. (2021). Smart integration of agricultural waste heat recovery systems for energy-efficient grain drying. Energy Reports, 7, 6215–6225. https://doi.org/10.1016/j.egyr.2021.09.065
Bhoi, P. R., & Patil, S. S. (2021). Performance evaluation of waste heat recovery system integrated with single-cylinder agricultural diesel engine. Journal of Cleaner Production, 280, 124354. https://doi.org/10.1016/j.jclepro.2020.124354
Gowrishankar, V., Krishnaraj, L., & Santhanakrishnan, R. (2022). Eco-smart IoT architecture for monitoring thermal energy in industrial drying processes. Measurement, 194, 111054. https://doi.org/10.1016/j.measurement.2022.111054
Guo, X., Sun, Y., & Zhao, D. (2022). Performance characteristics of finned-tube heat exchanger under diesel exhaust gas particulate fouling conditions. Powder Technology, 407, 117658. https://doi.org/10.1016/j.powtec.2022.117658
Jafari, A., & Mehdizadeh, S. A. (2021). Smart temperature and airflow control in agricultural dryers using IoT-based microcontrollers. Computers and Electronics in Agriculture, 188, 106334. https://doi.org/10.1016/j.compag.2021.106334
Kaviarasu, P., & Arunkumar, T. (2023). IoT-enabled smart monitoring and temperature control system for agro-industrial convective dryers. Smart Agricultural Technology, 4, 100185. https://doi.org/10.1016/j.atech.2023.100185
Khan, M. Y., & Raja, B. (2021). Performance investigation of compact heat exchanger with porous inserts for low-grade waste heat recovery. International Journal of Thermal Sciences, 164, 106898. https://doi.org/10.1016/j.ijthermalsci.2021.106898
Kumar, M., Sansaniwal, S. K., & Khatak, P. (2021). Progress in solar-diesel hybrid drying technologies for agricultural produce: A comprehensive review. Renewable and Sustainable Energy Reviews, 145, 111099. https://doi.org/10.1016/j.rser.2021.111099
Li, W., Yang, K., & Zhang, J. (2023). Multi-objective optimization of an exhaust gas heat exchanger for small diesel power units. Applied Thermal Engineering, 225, 120202. https://doi.org/10.1016/j.applthermaleng.2023.120202
Mishra, R. S., & Srivastava, V. K. (2023). Design optimization of finned-tube heat exchangers for waste heat recovery in low-power diesel engines. Thermal Science and Engineering Progress, 40, 101780. https://doi.org/10.1016/j.tsep.2023.101780
Ndiritu, H. M., Gathitu, B. B., & Ronoh, E. K. (2022). Thermo-fluid dynamics and pressure drop characterization of compact exhaust-gas heat exchangers for stationary diesel engines. Applied Thermal Engineering, 213, 118742. https://doi.org/10.1016/j.applthermaleng.2022.118742
Oladokun, M. O., & Odesola, I. F. (2021). Thermal performance and sizing of a recuperative heat exchanger for single-cylinder stationary diesel engine exhaust. Energy Reports, 7, 5472–5482. https://doi.org/10.1016/j.egyr.2021.08.112
Pangavhane, D. R., Sawhney, R. L., & Sarsavadia, P. N. (2022). Design and performance testing of natural convection and waste heat recuperation drying units. International Journal of Green Energy, 19(4), 380–392. https://doi.org/10.1080/15435075.2021.1948834
Prasad, L., & Subrahmanyam, S. (2022). Experimental analysis of a shell and helically coiled tube heat exchanger for diesel engine exhaust waste heat recovery. Heat Transfer Engineering, 43(11), 980–993. https://doi.org/10.1080/01457632.2021.1925345
Putra, N., Septiadi, W. N., & Irwansyah, R. (2021). Utilization of loop heat pipe heat exchanger for waste heat recovery in food drying applications. International Journal of Technology, 12(3), 540–550. https://doi.org/10.14716/ijtech.v12i3.4682
Rahman, M. M., & Hasan, M. M. (2022). Design and thermal optimization of an eco-friendly grain drying system powered by diesel engine waste heat. Journal of Thermal Analysis and Calorimetry, 147, 8563–8575. https://doi.org/10.1007/s10973-021-11124-7
Rout, K. S., Sahoo, S. S., & Nayak, S. (2023). Waste heat recovery from diesel generator exhaust using heat pipe heat exchanger for drying applications. Case Studies in Thermal Engineering, 45, 102981. https://doi.org/10.1016/j.csite.2023.102981
Sahu, M. K., & Choudhary, T. (2021). Advanced thermohydraulic performance analysis of a corrugated plate heat exchanger for waste heat harvesting. Case Studies in Thermal Engineering, 28, 101487. https://doi.org/10.1016/j.csite.2021.101487
Sari, D. P., & Wardana, I. N. G. (2022). Thermal enhancement and energy efficiency in agricultural dryers utilizing recovered engine heat. Journal of Mechanical Science and Technology, 36(6), 3121–3130. https://doi.org/10.1007/s12206-022-0544-2
Setiyo, M., Munahar, S., Triyono, B., & Purnomo, B. C. (2021). Heat recovery from internal combustion engine exhaust: A review of potential technologies for agricultural applications. Automotive Experiences, 4(1), 35–48. https://doi.org/10.31603/ae.4715
Thirunavukkarasu, M., & Senthil, R. (2023). Exergy, economic and environmental (3E) analysis of waste heat assisted drying systems. Environmental Science and Pollution Research, 30(15), 44102–44118. https://doi.org/10.1007/s11356-023-25381-8
Wang, Y., Chen, L., & Xing, H. (2023). Energy, exergy, and economic evaluation of an indirect waste heat recovery dryer for agricultural processing. Thermal Science and Engineering Progress, 38, 101662. https://doi.org/10.1016/j.tsep.2023.101662
Zhang, Z., Lu, Y., Roskilly, A. P., & Yu, X. (2022). Investigation of compact heat exchanger fouling and backpressure trade-offs in diesel waste heat recovery. Energy Conversion and Management, 254, 115264. https://doi.org/10.1016/j.enconman.2022.115264

