RECOVERY TIMBAL (Pb) DARI ANODE SLIME HASIL ELECTROLYTIC REFINING MENGGUNAKAN METODE SULFATISASI
Abstract
Anode slime is a residue generated from the electrolytic refining process that still contains lead (Pb) and has the potential to be recovered. This study aimed to identify the initial characteristics of anode slime, evaluate the effect of the sulfation method on Pb recovery, and determine the percentage of Pb recovery obtained. The sulfation process was carried out using H₂SO₄ at concentrations of 1 M, 2 M, 3 M, and 4 M with temperatures of 80°C, 100°C, and 120°C. The products obtained were analyzed using Atomic Absorption Spectroscopy (AAS) to determine the Pb content in the filtrate and precipitate. The results showed that the initial Pb content in the anode slime was 2.48%. The sulfation process successfully converted Pb into PbSO₄ with a sulfation percentage exceeding 99% under all treatment conditions. The optimum condition was achieved at an H₂SO₄ concentration of 4 M and a temperature of 100°C, resulting in a filtrate Pb content of 0.035%, a Pb content in the PbSO₄ precipitate of 3.6944%, and a Pb recovery percentage of 99.29%. These results indicate that the sulfation method using H₂SO₄ is effective for recovering lead from anode slime produced during the electrolytic refining process.
References
Binnemans, K., & Jones, P. T. (2023). Methanesulfonic acid (MSA) in hydrometallurgy. Journal of Sustainable Metallurgy, 9(1), 26-45.
Gregurek, D., Peng, Z., & Wenzl, C. (2015). Lead and Zinc Metallurgy. JOM, 67(9), 1986–1987.
Habashi, F. (1999). Handbook of Extractive Metallurgy (Vol. 2). Wiley-VCH.
Habashi, F. (2016). Extractive Metallurgy 1: Basic Thermodynamics and Kinetics. Métallurgie Extractive Québec.
Mubarok, M. Z., & Lieberto, E. (2013). Recovery of valuable metals from anode slime of copper refining process. Indonesian Mining Journal, 16(1), 1–1
Mubarok, Z., & Yahya, Y. (2014). Studi Perilaku Pelindian Timbal Dari Bijih Galena Nanggung Kabupaten Bogor Dalam Larutan Asam Asetat Dan Oksidator Hidrogen Peroksida. Jurnal Metalurgi, 29(1), 51–62.
Novotny, V., & Olem, H. (1994). Water Quality: Prevention, Identification, and Management of Diffuse Pollution. New York: Van Nostrand Reinhold.
Palar, H. (2008). Pencemaran dan Toksikologi Logam Berat. Jakarta: Rineka Cipta.
Rao, S. R. (2006). Resource recovery and recycling from metallurgical wastes. Elsevier.
Reilly, C. (1980). Metal Contamination of Food. London: Applied Science Publishers.
Rodliyah, I. (2012). Pelindian Timbal dan Emas dari Lumpur Anoda Hasil Pemurnian Tembaga Secara Elektrolisis. Tesis, Program Pascasarjana Institut Teknologi Bandung, Bandung.
Rodliyah, I., Ardha, N., Saleh, N., & Mubarok, M. Z. (2013). Effect of oxidizing agents in extracting gold from anode slime. Indonesian Mining Journal, 16(3), 154–161.
Rukini, A., Rhamdhani, M. A., Brooks, G. A., & Van den Bulck, A. (2023). Lead recovery from PbO using hydrogen as a reducing agent. Metallurgical and Materials Transactions B, 54(3), 996-1016.
Saha, R., Purwanto, H., Brooks, G., Akbar Rhamdhani, M., & Monaghan, B. (2023). Hydrogen Reduction of Lead Oxide (PbO): Kinetics and Mechanism. Metallurgical and Materials Transactions B, 54(3), 998–1015.
Wang, J., Li, M., Peng, B., Chai, L., & Yan, H. (2013). Sulfation Behavior of Lead-Bearing Materials During Sulfuric Acid Treatment. Hydrometallurgy, 137, 1–7.
Zhang, Y., Liu, X., Wang, J., & Zhao, H. (2023). Recovery of lead from metallurgical residues through sulfate conversion and thermal treatment. Journal of Cleaner Production, 412, 137409. https://doi.org/10.1016/j.jclepro.2023.137409.

