ANALISIS PENGENDALIAN KUALITAS DENGAN METODE DMAIC DAN FMEA UNTUK MENINGKATKAN KUALITAS JAHITAN PADA WOVEN BAG DI PT. XYZ

  • Adena Putra Daniswara Universitas PGRI Adi Buana Surabaya
  • Manik Ayu Titisari Universitas PGRI Adi Buana Surabaya
Keywords: DMAIC, FMEA, Quality Control, Woven Bag, Defect Reduction.

Abstract

This study aims to analyze quality control in the stitching process of woven bags at PT. XYZ using the DMAIC and FMEA methods. The main problem identified is the occurrence of product defects in the sewing process, particularly loose stitching, improper bag folding, and holes around the stitching area. Data were collected through observation, interviews, and production records covering the periods of October and November 2025. The DMAIC approach was used to define critical quality characteristics, measure process performance using DPMO and sigma level, analyze root causes of defects, develop improvement actions, and establish continuous process control. The results show that in October 2025, total production reached 803,469 units with 19,547 defects, resulting in an average DPMO of 8,125.03 and a sigma level of 3.91. In November 2025, production increased to 888,408 units with 18,894 defects, where the average DPMO decreased to 7,177.69 and the sigma level improved to 3.95. FMEA analysis indicates that the highest-risk failure mode is loose stitching, caused by low thread tension, worn needles, poor thread quality, and operator inaccuracy. Proposed improvements include machine setting standardization, implementation of SOPs, routine inspection, scheduled maintenance, and statistical-based quality monitoring. The integration of DMAIC and FMEA helps prioritize corrective actions more systematically. Overall, consistent implementation of these methods is expected to reduce defect rates, improve process stability, and ensure quality improvement in woven bag production.

References

Achmad Davit Hardianto, W. S. (2025). Analisa Kecacatan Produk Menggunakan Metode Statistical Process Control (SPC) dan Failure Mode and Effects Analysis (FMEA). Ekonomis: Journal of Economics and Business, 9, 416–424.
AGUS SUSANTO, N. I. M. 12660017. (2017). Analisis Pengendalian Kualitas Tekstil Dengan Pendekatan Six Sigma-Dmaic Di Pt Primissima Sleman Yogyakarta. 12660017, 104. https://digilib.uin-suka.ac.id/id/eprint/26806/
Aiman, M. H. (2023). Analisis Kecacatan Produk Pada Mesin Pemotongan Dengan Menggunakan Metode FMEA. Jurnal Teknik Industri, 9(2), 577–587.
Atmaca, E., & Girenes, S. S. (2013). Lean Six Sigma methodology and application. Quality & Quantity, 47(4), 2107–2127.
Basuki, A., & Chusnayaini, I. (2021). Identifikasi resiko kegagalan proses penyebab terjadinya cacat produk dengan metode FMEA-SAW. Matrik: Jurnal Manajemen Dan Teknik Industri Produksi, 22(1), 37–44.
De Mast, J., & Lokkerbol, J. (2012). An analysis of the Six Sigma DMAIC method from the perspective of problem solving. International Journal of Production Economics, 139(2), 604–614.
Didiharyono, D., Marsal, M., & Bakhtiar, B. (2018). Analisis Pengendalian Kualitas Produksi Dengan Metode Six-Sigma Pada Industri Air Minum PT Asera Tirta Posidonia, Kota Palopo. Sainsmat : Jurnal Ilmiah Ilmu Pengetahuan Alam, 7(2), 163. https://doi.org/10.35580/sainsmat7273702018
DOUGLAS C. MONTGOMERY. (2009). Statistical Quality Control. Permissions Department, John Wiley & Sons, Inc.
Faris Yasin Rochmatullah, R. R. (2025). Penerapan Metode Six Sigma dan FMEA untuk Pengurangan Cacat dalam Produksi Tas Anyaman. ITEJ (Information Technology Engineering Journals), 10.
Fransiscus, H., Juwono, C. P., & Astari, I. S. (2014). Implementasi metode six sigma DMAIC untuk mengurangi paint bucket cacat di PT X. Jurnal Rekayasa Sistem Industri, 3(2), 53–64.
Gasperz, V. (2002). Pedoman Implementasi Program Six Sigma: Terintegrasi dengan ISO 9001: 2000 MBNQA & HACCP. Gramedia Pustaka Utama.
I Dewa Putu Aditya Rai Artawidia, N. U. H. (2024). ANALISIS KAPABILITAS PROSES PRODUKSI PAKAN UDANG DENGAN METODE STATISTICAL PROCESS CONTROL PADA PT CPB.
Jun, B. J. H., & Juwono, A. L. (2011). Studi Perbandingan Sifat Mekanik Polypropylene Murni Dan Daur Ulang. MAKARA of Science Series, 14(1). https://doi.org/10.7454/mss.v14i1.461
Kaban, R. (2014). Pengendalian Kualitas Kemasan Plastik Pouch Menggunakan Statistical Procces Control (SPC) di PT Incasi Raya Padang. Jurnal Optimasi Sistem Industri, 13(1), 518–547.
Lili Karmela Fitriani dan Aglin Tiara Putry. (2020). PENGENDALIAN KUALITAS DENGAN METODE SIX SIGMA UNTUK MENEKAN TINGKAT KERUSAKAN PRODUK. Jurnal Ilmiah Indonesia, 5.
Nurkholiq, A., Saryono, O., & Setiawan, I. (2019). Analisis pengendalian kualitas (quality control) dalam meningkatkan kualitas produk. Jurnal Ekonologi Ilmu Manajemen, 6(2), 393–399.
Phengky Pangestu, F. F. (2018). Implementasi Six Sigma dalam Peningkatan Kualitas Proses Produksi LED TV di PT Sharp Electronics Indonesia. 17, 152–164.
Prabu, K., Makesh, J., Naveen Raj, K., Devadasan, S. R., & Murugesh, R. (2013). Six sigma implementation through DMAIC: A case study. International Journal of Process Management and Benchmarking, 3(3), 386–400. https://doi.org/10.1504/IJPMB.2013.058162
Radu Godina, B. G. S. and P. E.-C. (2021). A DMAICIntegrated Fuzzy FMEAModel: ACaseStudyinthe Automotive Industry.
Rahmawati, B. D., & Maharani, N. N. B. (2023). Assessing Cause of Defect Using Failure Mode and Effect Analysis. Spektrum Industri, 21(1), 1–7. https://doi.org/10.12928/si.v21i1.91
Rifaldi, M., & Sudarwati, W. (2024). Penerapan Metode Six Sigma dan FMEA Sebagai Usaha untuk Menggurangi Cacat pada Produk Bracket. Prosiding Semnastek.
Risma Dwi Sukma Wardani, N. R. (2025). Analisis pengendalian kualitas pada mesin potong jahit dalam proses produksi Woven Bag menggunakan metode SQC dan FMEA di PT . XYZ. 8(1), 605–614.
Sharma, R. K. (2021). Quality management tools and standards. Springer Tracts in Mechanical Engineering, 25–62. https://doi.org/10.1007/978-981-15-9512-7_2
Shaymaa M. M. El-Awady. (2023). Overview of Failure Mode and Effects Analysis (FMEA): A Patient Safety Tool.
Sirine, H., & Kurniawati, E. P. (2017). Pengendalian kualitas menggunakan metode six sigma (Studi kasus pada PT Diras Concept Sukoharjo). AJIE (Asian Journal of Innovation and Entrepreneurship), 2(03), 254–290.
Siska Apri Andita, Siti Rahayu, dan H. W. (2025). Penerapan Metode Six Sigmadan FMEA untuk Meningkatkan Kualitas Produk di Industri Manufaktur Otomotif. KaLIBRASI, 8, 58–69.
Sugianto, A. A., & Titisari, M. A. (2025). ANALISIS PEMBOROSAN (WASTE) PADA PROSES PACKING KERUPUK MENGGUNAKAN VALUE STREAM MAPPING (VSM) PADA PERUSAHAAN MAKANAN RINGAN. Jurnal Ilmiah Teknik Dan Manajemen Industri, 5(1), 80–90.
Sugiyono. (2020). Metode Penelitian Kuantitatif, Kualitatif dan R&D. Alfabeta.
Suhairi, S., Hidayat, A., Yasmita, H., Sirait, M. K. S., & Reitandi, R. (2022). Analisis Kebijakan Produk Dalam Perkembangan Pemasaran Global di Indonesia. Jurnal Manajemen Akuntansi (JUMSI), 2(4), 938–942.
Suwanda, S. (2024). The role of the six sigma method in controlling and improving product quality. Jurnal Ilmiah Multidisiplin Indonesia (JIM-ID), 3(01), 34–42. https://doi.org/10.58471/esaprom.v3i01.3858
Walujo, D. A., Koesdijati, T., & Utomo, Y. (2020). Pengendalian kualitas. Scopindo Media Pustaka.
Warsita, B. (2013). Evaluasi media pembelajaran sebagai pengendalian kualitas. Jurnal Teknodik, 92–101.
Widyarto, W. O., Dwiputra, G. A., & Kristiantoro, Y. (2015). Penerapan Konsep Failure Mode And Effect Analysis (FMEA) Dalam Pengendalian Kualitas Produk Dengan Menggunakan Metode Six Sigma. Jurnal Rekavasi, 3(1), 54–60.
Zare Mehrjerdi, Y. (2011). Six‐Sigma: methodology, tools and its future. Assembly Automation, 31(1), 79–88.
Published
2026-08-12
How to Cite
Adena Putra Daniswara, & Manik Ayu Titisari. (2026). ANALISIS PENGENDALIAN KUALITAS DENGAN METODE DMAIC DAN FMEA UNTUK MENINGKATKAN KUALITAS JAHITAN PADA WOVEN BAG DI PT. XYZ. EDU RESEARCH, 7(2), 7840-7858. https://doi.org/10.47827/jer.v7i2.3417
Section
Articles